FXS CTRL Dosing Pump Series

 - FXS CTRL Dosing Pump SeriesFXS CTRL 3 Dosing pump series Three different controllers and a dosing pump in one box Common key features:  pH: measuring range 0÷14,00 pH (resolution 0,01pH)  RX: measuring range: -1000÷ +1400 mV (resolution 1mV)  Free chlorine*: range: 0÷20,00 ppm (resolution 0,1ppm) *Cl2 suitable either with membrane-potentiostatic Chlorine sensors or amperometric open chlorine cells (latter upon request)
  • · 2 Reset modes: - full reset - partial reset keeping settings
  • · Proportional mode: selection of proportional range value
  • · Delay adjustment
  • · Delay at powering ON the pump (electrodes polarization)
  • · Hysteresis regulation
  • · Setting for proximity switch to stop operations in case of no
  • water into the electrode cell holder
  • · Password setting
  • · 4-20 mA output for chart recorder with calibration of mA output
  • · Stand-by for cleaning electrodes and sensors or re-calibration
FXS CTRL 2 Dosing pump series Two different controllers and a dosing pump in one box Common key features:  pH: measuring range 0÷14,00 pH (resolution 0,01pH).  RX: measuring range: -1000÷ +1400 mV (resolution 1mV).
  • · 2 Reset modes: - full reset - partial reset keeping settings.
  • · Proportional mode: selection of proportional range value.
  • · Delay adjustment.
  • · Delay at powering ON (electrodes polarization).
  • · Hysteresis regulation.
  • · Over-dosing alarm time value.
  • · Alarm for set point minimum lower value.
Please bear in mind that FXS CTRL2 & CTRL3  dosing pump series with the integral controller, come without with sensors & probes.which are available upon request.